‘s Free Flow Valve operates on the Discharge
side of the pump as the flow through the pipeline
starts or stops, the ball automatically rises or falls,
opening and closing the valve. This occurs without
noticeable shock or hammer, regardless of the line
pressure or the speed of closure

• Valve housing is constructed of high quality carbon
  steel. Stainless steel is an option.
• Valve housing can be natural rubber lined. A range
  of elastomer grades is available for corrosive
  duties (URETHANE or Ceramic).
• Ball is made of hollow carbon steel and is urethane
  coated. Other elastomers are also available
  (Stainless Steel for high pressure).
• The seat is made in Abrasion Resistant
  AR steel (500 Brinnell hardness), URETHANE or
  Stainless Steel and is replaceable.
• Flanges are typically made in carbon or stainless
  steel and drilled to customer requirements. For
  Europe, flanges are made to DIN.
• Working Pressure Standards are 16, 25, 40, 80
  and 100 Bar.
• Operating temperature to 80°C. Higher conditions
  are possible if the valve is constructed from suitable
  material.
• The Free Flow Valve can work in the horizontal and vertical position.

• Rotating and floating ball - self adjusts to flow.
• Self cleaning due to the freely rotating ball.
• Long ball life due to ball rotation.
• Full port opening. No obstruction to the flow.
• Virtually no pressure drop. Eliminates pipe hammer.
• Long seat life. Seats are out of the flow and can be rotated in line to increase seat life fourfold.
• Easy maintenance. Seat and ball can be inspected or replaced without removing the free flow from the pipeline.
• Virtually maintenance free because of the simple design.